The possibility to fit a HC drive, in installed electric pumps that don’t have inverters and in professional systems with pumps that have a higher power.
Installation is directly on the pump’s electrical terminal board thanks to a universal adapter provided with the product. The pressure sensor is provided.
The installation is directly on the pipe, cooled by water and the device has a built-in pressure sensor.
The device has an ON/OFF input for a float switch or remote […]
Helpdesk Mac3 is the web application that can track your pump. Mac3’sVFD can connect to web, via wifi network. With your smartphone or PC, entering the
The parameters for the first installation are the pressure desired and the maximum current of the pump; these are clear displayed so that there is no need to read the […]
Available in 2 version:
SuperSimplex E : electronic device with dry running protection with automatic restarts.
SuperSimplex M : Electromechanical device with input for floating for dry running protection.
The installation is directly on the pipe, with a built-in pressure sensor, so it can be regulated the restart pressure.
Compared to the previous model SuperSimplex, the device E-control integrates a more effective flow detection, that comes to the electronic flow switch, E-flow.
Dry running protection and flashing led to indicate flow presence
The device comes with a factory set pressure setting that can be changed using the internal regulating system.
For American market available a versione with current up to 25A and […]
The connection cable between the inverter and the pump creates a capacitive effect that can inhibit the proper functioning of the system To avoid this problem
HCA air-cooled drives, comes with a pressure transducer 4-20mA, 3 cable for external use. In addition to the standard are available in various lenghts.
Mac3 VFD are certified EMC for residential use, in case of installation in particularly sensitive enviroment with exposure to electromagnetic interference, Mac3 makes available a range
Dimensions important to give a bigger buoyancy and its shape which has no edges, for which it is particularly suitable for sewage water. Dual operation for filling and emptying.
It is highly reliable and can be produced in many variations in accordance with the needs of each client and country. Dual operation for filling and emptying.
Has a high breaking capacity, with micro-20A. Dual operation for filling and emptying.
Available with switch angle standard +/-10° and also with a wider one.
Available different types of cable, suitables for different applications.
The model Agma 22 is also available with flame-retardant cables; the model AgmaW allows the adjustment of the levels of intervention. If it is not possible to use a floating […]
It can be easily installed nearby of the pump through the two holes in the structure. The models with 12V or 24V power supply with delay ON/OFF, are particularly suitable […]
A wide range from 3/8” to 1 ½” and two versions: Standard and Adanced (ADJ).
The ADJ version has intervention levels regulable, the adjusting mechanism is very simple and […]
On request, all MAC3 level regulators may be equipped with a piggy back plug. The piggy back plug is connected to the power supply and receives
Possibility of activating or deactivating controls by means of dipswitch. The installation of 4 electroprobes would be necessary to obtain the same functions
High tech device with micro controller, beside adjustable sensitivity, permits to set a relay start delay and has multivoltage power supply version.
Models NS[standard sensitivity] Particularly suitable to control water and liquids for a total resistance of 5.6 ohm max. The control unit can also be distant from
the electroprobes of the Z series are particularly interesting for their reduced size. The Z11 model has a double voltage supply
Easy to install on the wall thanks to the support provided. The LED bar allows a simple and intuitive reading of the water reserve.
Ievice used. This implies the use of a pressurized water system designed to support a prevalence for highest pressure. This kind of system DOES NOT optimize
Our slogan is “Sun becomes water” from which the name LiquidSun. Our technology solutions enable to transfer all the sun energy directly to liquid movement, no electricity network
Control Panel runs the pumps and guarantees ammetric protection that can be regulated directly on electronic board, by the installer. The automatic start is driven by the inputs of the […]
No need of probes, particularly suitable for applications with deep wells. Auxiliary input for float or pressure switch.
User friendly by a LCD display, on which all the information, relative to the device, is visualized.
User friendly by a LCD display, on which all the information, relative to the device, is visualized, as well as three function keys for interaction and parameter modification.
When the level reulator closes the switch, Sentinel 2 activates its internal buzzer and activate any alarm connected to the relay.
Available several models in order to produce systems tith gratly reduced assembling costs.
Mod. 22 single phase This device, for motor protection, controls that the drop voltage doesn’t exceed the established value, by turning off the relay when it
Cases for electronic devices – 6M Din Cases Container for electronic equipment that can be connected to DIN EN 50022 rails according to DIN 43880 regulations.
more info Accept
Questo sito utilizza i cookie per fornire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" permetti il loro utilizzo.